Saddles & Expansion Joints
Clamp-It PVC Tapping Saddles
The Clamp-It Tapping saddles allow you to tap into existing piping systems without having to cut out and insert a tee. The 0-ring and 0-ring groove are designed so that there is no gap between the installed saddle and the pipe. When pressure is applied the pipe compression is replaced by the fluid pressure without increasing the pressure on the saddle. The hinge design eliminates the need for two clamping wedges. The clamping wedge equally distributes the pressure over the entire width of the saddle. It locks and aligns the saddle top and bottom into proper position.